Micro

LiPro PCB LiPro Micro The LiPro Micro provides state of charge monitoring, passive balancing and safety discharge for lithium batteries. The key benefit to utilising the LiPro Micro on your battery pack is the high accuracy balancing of the internal cells, prolonging the life of the battery. The key features of the LiPro Micro: State of Charge display (Based on cell voltage curve) Cell balancing (to within 5mV total error) Safety discharge after 7 days idle If pack sits at a high voltage for a long period of time the unit will discharge the pack down to a safer voltage level to prevent cell damage Very low power usage. (<100uA) Designed for LiPo and LiFePo4 (LiPo 4.1/4.2/4.3/4.35/4.4V & LiFePo4 3.6v) – Default profile supports most LiPo packs – Different curves can be selected to suit the connected pack – 3-5 Series cells supported (solder bridges on the back to select cell count) Operation Connect the small PCB to your battery’s balance plug. The board comes with a JST connector populated, this is normally a 3S but 3,4 or 5 is available on request. This is also very easy to change if you are used to soldering. ...